Is this good -looking at home kitchen floor non -slip project?
2 thoughts on “Is the ground non -slip project easy to do?”
Leave a Comment
You must be logged in to post a comment.
Shopping Cart
Is this good -looking at home kitchen floor non -slip project?
You must be logged in to post a comment.
Is the ground non -slip project easy to do?
. The use of non -slip solution to allow the ground to effectively non -slip
This Anti -slip solution is a product that is coated with ground materials such as ceramic tiles and stone materials to play a non -slip effect. It belongs to the anion surface active agent and is a water -soluble product.
The principle is that this liquid penetrates into the surface of the ground material. When contacting the soles of the foot, it forms a suction effect to achieve the anti -slip purpose. The friction coefficient reaches 0.5 to 0.8, and the use effect on the humid ground is the best.
The variety of ground materials is divided into marble anti -sliding solution, ceramic tile anti -sliding solution, wooden floor anti -sliding fluid, water milling and skidial solution. The latest products are environmentally friendly, non -VOC and harmless anti -slip products.
2, organic resin artistic landscape, effective non -slip
If the artistic landscape of organic resin art, it is a specially made of organic resin mortar with a certain artistic style. Ge, prepare a mold with a strong three -dimensional and artistic landscape. Such grounds have excellent weather resistance, anti -slip resistance and durability, and are suitable for occasions with large people, especially suitable for non -slip after rain.
3, the non -slip treatment of the stairs step layer should be convenient to walk, wear -resistant, non -slip, and easy to clean. Commonly used include cement mortar planes, water mills, stone surface layers, stone surface layers, cylinder brick surface layers, non -slip floor tile surface layers, carpet surface layers, etc. In order to prevent pedestrians from slipping, step layer, especially those with large people, large traffic flows, especially people with large traffic flows. The surface of the stairs should be set on the surface of the stairs, and at the same time, it plays the role of protecting the corner of the Yangtze Royal. Non -slip bars are usually located in a nearly port, which is 2 to 3RAM higher than the stepping surface, but it should not be too high, otherwise it will cause inconvenience of walking. Commonly used non -slip materials include cement iron chips, diamond sand, metal strips (cast iron, aluminum strips, copper, copper, copper, copper, copper, copper, copper, copper, copper, copper, copper, copper, copper ), Ceramic brocade, and so on.
4, road non -slip treatment
In order to improve the quality of high -grade road cement, the quality of the pavement, and ensure the safety of driving, it is necessary to study various effective anti -slip · processing techniques. The anti -slip treatment measures on the cement pavement can be divided into two categories according to the timing of the implementation:
① If the mortar layer or the fine collection of the surface of the road surface is provided to provide anti -slip resistance (grooves ), Pressing (grooves), carvings, acid erosion, hair, cold sticky and asphalt noodles and other treatment processes.
② It is mainly a construction process such as nude stones and embedded stones with anti -slip resistance. For the first case, in order to obtain a good anti -slip effect, it is necessary to choose the applicable wear -resistant and anti -slip fine materials (such as clean natural sand materials, quartz rocks, sandstone, granite, etc.).
Basic processes: The cement floor is as flat as possible, collects light, and maintains it for more than 20 days. Cleaning (must be completely dry after cleaning) or polishing and removing low -intensity floating slurry on the surface layer -permeability epoxy resin primer rolling one or three times, requiring the color of the ground to become darker after the ground color is deeper - Over the grassroots, the epoxy resin mortar is also applied to the epoxy resin surface twice -anti -scratch -resistant wear -resistant paint roller (optional this time). If the concrete ground is not enough, the gray and sand can be used, and the epoxy floor paint cannot be made directly. The VL-M2 cement floor sand treatment agent must be used in advance for hardening the ground, and then the floor paint is made after drying.
Pay content for time limit to check for freenAnswer 1. How to skid the ground anti -skid project is a scam, try not to invest, so as not to be cheated. Forgive me, the prospect of the project is not very good, or the target customer base of the project is very narrow. Second, the reason is that with the advancement of the technical level, the physical indicators such as wear resistance and non -slip resistance of tiles are getting better and better; similarly, people also tend to buy better tiles with better quality in home decoration. The more the customer base, the more Come smaller. 3. Therefore, if you are still working in this industry, you should accumulate customer contact, develop auxiliary industries, and prepare for the transformation. If you have not yet entered the industry, it is not recommended to enter the industry.nExpanded information ① A non -slip floor tiles are a relatively small industry. Many people are not optimistic about this, which is normal. In terms of demand, it is not an ordinary market. Generally speaking, middle -class families do not require people to make non -slip floor tiles. In addition, there are many alternatives of non -slip floor tiles, such as floor mats, floor tiles, etc., they are non -slip during production; these alternatives are not only effective, but also low investment. Therefore, whether it is demand or replacement, the floor tile anti -slip industry is not very friendly. In fact, every existing industry has its value and corresponding leaders. Although the non -slip requirements for floor tiles are not high, they do need to be needed on some occasions. Such as high -end hotels, important VIP receptions, etc. ② In these places, the return rate is usually very high. In addition, when making non -slip floor tiles, the needs of customers should be considered and the trust of customers should be considered. Therefore, we can develop relevant needs in the nearby and optimize business structure. In this way, when the local tile anti -slip business declines, we can do a good job of transformation. There will be a life cycle in any industry, just like a paging machine in the 1990s. At that time, it looked prosperous, but disappeared in the next 10 years.n③ For some key parts of non -slip, people have more choices, such as various non -slip pads, tiles, marble anti -sliding bars. The investment cost is low and the effect is obvious. Do a good job of non -slip on the ground and save a lot of costs. For some large -scale tooling projects, the ground is smooth and wear -resistant. This is a problem that must be considered from the design stage to the construction stage, with strict standards.n1 morenBleak